GW Instek APS-1102 User Manual - Manual (Page 171)

5.6 System Menu
APS-1102 Programmable AC/DC Power Source 5-45
5.6.8 Reset function
This function resets all basic settings to their initial (factory) settings.
The APS-1102 cannot be reset when output is on. Always turn output off before resetting the APS-1102.
See “3.2 Display and Initial Settings at Power-on”, for description of the settings after a
reset.
 Operation steps
1. Press the or key to move the cursor to “RESET…”.
ENTER CANCEL
Cursor
2. Press the
ENTER
key to display the EXEC box .
ENTER CANCEL
EXEC box
3. After selecting “EXEC”, press the
ENTER
key to reset the APS-1102.
5.6.9 System information
Select “INFORMATION” in the “SYSTEM” screen to view system information such as the firmware
version number.
See “8.4 Checking the Version Number”, for description of the operation steps for viewing
this version number.