GW Instek APS-1102 User Manual - Manual (Page 202)

6.3 Command Descriptions
APS-1102 Programmable AC/DC Power Source 6-30
f) STATus subsystem
 STATus:OPERation:CONDition?
This returns the operation condition register (OPCR). The response ranges from 0 to 20482.
Syntax: STATus:OPERation:CONDition?
Parameters: None
Query example: STAT:OPER:COND?
Response format:
Response example: 16384
 STATus:OPERation:ENABle
This sets the operation event enable register (OPEE). The setting ranges from 0 to 20482.
Syntax: STATus:OPERation:ENABle
Parameters: 0 to 20482
Command example: STAT:OPER:ENAB 16384
Query example: STAT:OPER:COND?
Response format:
Response example: 16384
 STATus:OPERation[:EVENt]?
This returns the operation event register (OPER) value. The response ranges from 0 to 20482.
Syntax: STATus:OPERation[:EVENt]?
Parameters: None
Query example: STAT:OPER?
Response format:
Response example: 16384