GW Instek APS-1102 User Manual - Manual (Page 81)

4.2 Measurement of Inrush Current
APS-1102 Programmable AC/DC Power Source 4-17
4. Press the TOP MENU key or the CANCEL key to return to the SET menu screen.
 The measured value window shows the peak value set in the measurement display.
SEQUENCE
STOP START
TOP
MENU LOCAL HOLD
Peak value
Peak hold value
4.2.4 Reset the peak current hold value
The APS-1102 includes a function that resets the peak current hold value.
A reset sets the peak current hold value to 0 Apk, and the maximum peak value of current is updated
until the next reset is performed.
The current peak value is reset automatically at power-on.
To reset the peak current hold value, select “MEASURE” in the MISC menu
.
 Operation steps
1. Press the or key to move the cursor to the icon, then press the
ENTER
key.
ENTER CANCEL
Cursor
 The MISC menu is displayed.