GW Instek APS-1102 User Manual - Manual (Page 105)

4.4 Using the Sequence Function
APS-1102 Programmable AC/DC Power Source 4-41
6. Press the key to move the cursor to the line displaying “CONST” (fourth line from the top).
ENTER CANCEL
7. Press the
ENTER
key to display the selection box.
ENTER CANCEL
8. Press the or key to move the cursor to “SWEEP”.
ENTER CANCEL
9. Press the
ENTER
key to confirm the setting.
The settings for all other items are the same as the default settings, so they are not changed.
Selection box