GW Instek APS-1102 User Manual - Manual (Page 50)

3.4 Main Operation Example
APS-1102 Programmable AC/DC Power Source 3-20
2. Press the
ENTER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to the output voltage range to be selected.
ENTER CANCEL
4. Press the
ENTER
key. Then the icon appears in the status window.
ENTER CANCEL
Status window
⇒ The icon goes out in a few seconds, then the display will change to the selected output
voltage range.
 Changing the output voltage range takes about eight seconds.