GW Instek APS-1102 User Manual - Manual (Page 161)

5.5 MISC Menu
APS-1102 Programmable AC/DC Power Source 5-35
5.5.8 Output on/off
The APS-1102 output on/off setting can be entered using the
OUTPUT
key on the front panel, but it can also
be controlled via the MISC menu.
See “3.4.8 Output on/off ”.
 Operation steps
1. Press the or key to move the cursor to “OUTPUT”.
ENTER CANCEL
2. Press the
ENTER
key to display the selection box.
ENTER CANCEL
3. Press the key to move the cursor to “ON”.
ENTER CANCEL
4. Press the
ENTER
key to turn output on, at which time the output on/off LED goes on.
OUTPUT OUTPUT
Output off Output on
Output on/off LED is on.