GW Instek GDS-2000A series Programming Manual - Manual (Page 98)

GDS-2000A Programming Manual
98
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:FRFDelay?
3.43E-6
Select channel 1 and 2 as source1/2, and then
measure FRF.
:MEASure:FFRDelay
Description Returns the delay between the first falling edge of
source1 and the first rising edge of source2.
Syntax :MEASure:FRRDelay {?}
Related
Commands :MEASure:SOURce
Return parameter Returns the delay.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:FRRDelay?
-8.56E-6
Select channel 1 and 2 as delay source1/2, and
then measure FFR.
:MEASure:FFFDelay
Description Returns the delay between the first falling edge of
source1 and the first falling edge of source2.
Syntax :MEASure:FFFDelay{?}
Related
Commands :MEASure:SOURce
Query
Query