GW Instek GDS-2000A series Programming Manual - Manual (Page 85)

COMMAND DETAILS
85
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:NWIDth?
4.995E-04
Selects Channel 1, and then measures the negative
pulse width.
:MEASure:PDUTy
Description Returns the positive duty cycle ratio as percentage.
Syntax :MEASure:PDUTy{?}
Related
commands :MEASure:SOURce
Return parameter Returns the positive duty ratio.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PDUTy?
5.000E+01
Selects Channel 1, and then measures the positive
duty cycle.
:MEASure:PERiod
Description Returns the period.
Syntax :MEASure:PERiod{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the period.
Query
Query