GW Instek GDS-2000A series Programming Manual User Manual
Page 227
COMMAND DETAILS
227
Return parameter
Returns the raw data + header information for the
selected channel in the following format:
Format,2.0A,Display,1,Memory
Length,5000,IntpDistance,0,Trigger
Address,2500,Threshold
Used,1.400E+00,Source,D2,Vertical
Units,V,Label2,;Firmware,V0.99.03,Horizontal
Units,S,Horizontal Scale,5.000E-04,Horizontal
Position,0.000E+00,Horizontal Mode,Main,SincET
Mode,Real Time,Sampling Period,1.000E-
06,Time,25-Sep-12 16:13:41,Waveform
Data;
:D
Description
Returns the data in acquisition memory for the
selected digital channel as a header + raw data.
Note
The data from this command is equivalent to the
data that is saved in the LM Detail format using
the scope panel controls.
Syntax
D
Related
commands
ACQuire:RECOrdlength
:HEADer
Parameter
Digital channel D0 to D15
Return parameter
Returns the raw data + header information for the
selected channel in the following format:
Format,2.0A,Display,1,Memory
Length,1000000,IntpDistance,0,Trigger Address,-
563219,Threshold
Used,1.400E+00,Source,D2,Vertical
Units,V,Label2,;Firmware,V0.99.03,Horizontal
Units,S,Horizontal Scale,5.000E-04,Horizontal
Position,0.000E+00,Horizontal Mode,Main,SincET
Mode,Real Time,Sampling Period,5.000E-
09,Time,25-Sep-12 16:34:36,Waveform
Data;
Query