GW Instek GDS-2000A series Programming Manual - Manual (Page 230)

GDS-2000A Programming Manual
230
Label Commands
The commands, “:BUS1:LABel”, “:BUS1:LABel:DISPlay”,
“:D:LABel”, “:D:LABel:DISPlay”,
“DIGital:ANAlog:A:LABel” and “DIGital:ANAlog:A:LABel”
are only available when the DS2-8LA or DS2-16LA option is
installed.
:CHANnel:LABel .................................................. 230
:CHANnel:LABel:DISPlay .................................... 231
:REF:LABel ........................................................... 232
:REF:LABel:DISPlay ............................................. 232
:BUS1:LABel ............................................................... 233
:BUS1:LABel:DISPlay ................................................. 234
:D:LABel............................................................... 234
:D:LABel:DISPlay ................................................. 235
:DIGital:ANAlog:A:LABel .................................... 236
:DIGital:ANAlog:A:LABel:DISPlay ....................... 237
:SET:LABel ........................................................... 237
:CHANnel:LABel
Description Sets or returns the file label for the selected
channel.
Syntax :CHANnel:LABel { | ?}
Related
commands :CHANnel:LABel:DISPlay
Parameter Channel 1, ,2, 3, 4
The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, “string”.
Set
Query