GW Instek GDS-2000A series Programming Manual - Manual (Page 83)

COMMAND DETAILS
83
:MEASure:FOVShoot
Description Returns the fall overshoot amplitude.
Syntax :MEASure:FOVShoot{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the fall overshoot as a
percentage
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FOVShoot?
1.27E+0
Selects Channel 1, and then measures the fall
overshoot.
:MEASure:FPReshoot
Description Returns fall preshoot amplitude.
Syntax :MEASure:FPReshoot{?}
Related
Commands :MEASure:SOURce
Returns Returns the fall preshoot as .
Return parameter Returns the fall preshoot as a percentage.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Query
Query