GW Instek GDS-2000A series Programming Manual - Manual (Page 205)

COMMAND DETAILS
205
Syntax :SEARCH:TRIGger:BUS:B1:I2C:DATa:VALue
{string | ? }
Related
commands :SEARCH:TRIGger:BUS:B1:I2C:DATa:SIZe
Parameter The number of characters in the string
depends on the data size setting. The
string must be enclosed in double
quotes, "string".
x = don’t care
1 = binary 1
0 = binary 0
Return Parameter Returns the data value.
Example 1 :SEARCH:TRIGger:BUS:B1:I2C:DATa:SIZe 1
:SEARCH:TRIGger:BUS:B1:I2C:DATa:VALue
"1x1x0101"
Sets the value to XXX0101
Example 2 :SEARCH:TRIGger:BUS:B1:I2C:DATa:VALue?
1X1X0101
:SEARCH:TRIGger:BUS:B1:UART:CONDitio
n
Description Sets or queries the UART search triggering
condition.
Syntax :SEARCH:TRIGger:BUS:B1:UART:CONDition
{ RXSTArt | RXDATA | RXENDPacket | TXSTArt |
TXDATA | TXENDPacket | TXPARItyerr | RXPARItyerr
| ? }
Parameter RXSTArt Set search trigger on the RX Start
Bit.
RXDATA Set search trigger on RX Data.
RXENDPacket Set search trigger on the RX End of
Packet condition.
Set
Query