GW Instek GDS-2000A series Programming Manual - Manual (Page 92)

GDS-2000A Programming Manual
92
Syntax :MEASure:CMEan{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the cyclic mean.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:CMEan?
9.480E-01
Selects Channel 1, and then measures the mean
value of the first period.
:MEASure:HIGH
Description Returns the high voltage/current.
Syntax :MEASure:HIGH{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the high value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:HIGH?
3.68E-3
Selects Channel 1, and then measures the high
voltage/current.
Query