GW Instek GDS-2000A series Programming Manual - Manual (Page 101)

COMMAND DETAILS
101
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:LFRDelay?
-9.99E-6
Select channel 1 and 2 as delay source1/2, and
then measure LFR.
:MEASure:LFFDelay
Description Returns the delay between the first falling edge of
source1 and the last falling edge of source2.
Syntax :MEASure:LFFDelay{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the delay.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:LFFDelay?
-9.99E-6
Select channel 1 and 2 as delay source1/2, and
then measure LFF.
:MEASure:PHAse
Description Returns the phase between source 1 and source 2.
Syntax :MEASure:PHAse{?}
Related
Commands :MEASure:SOURce
Query
Query