GW Instek GDS-2000A series Programming Manual - Manual (Page 226)

GDS-2000A Programming Manual
226
Example DIGital:ANAlog:A1:DISPlay on
Turns on the A1 analog waveform.
:DIGital:ANAlog:A:RATio
Description Sets or returns the vertical scale of the selected
analog waveform.
Syntax :DIGital:ANAlog:A:RATio { | ? }
Parameter Analog waveform 1 or 2.
Ratio (0.1, 0.2, 0.3, 0.4……1)
Return parameter Returns the scale of the selected
analog waveform.
Example1 :DIGital:ANAlog:A1:RATio 0.1
Sets the analog waveform scale for A1 to 0.1.
:D:MEMory
Description Returns the data in acquisition memory for the
selected digital channel as a header + raw data.
Syntax D:MEMory?
Related
commands ACQuire:RECOrdlength
:HEADer
Parameter Digital channel D0 to D15
Set
Query
Query