GW Instek GDS-2000A series Programming Manual - Manual (Page 255)

COMMAND DETAILS
255
:GONogo:SOURce
Description Sets the source for the Go/NoGo signal.
Syntax :GONogo:SOURce {CH1|CH2|CH3|CH4|?}
Parameter/
Return Parameter CH1~CH4
Example :GONogo:SOURce CH1
Sets the source to CH1.
:GONogo:VIOLation
Description Sets or returns actions for the Go/NoGo violations.
Syntax :GONogo:VIOLation
{STOP|STOP_Beep|CONTinue|CONTINUE_Beep|?}
Parameter/
Return Parameter STOP The waveform will be frozen.
STOP_Beep The waveform will be frozen and
a beep will be output.
CONTinue Ignore the violation.
CONTINUE_Beep Output a beep, but continue to
monitor the signal.
Example :GONogo:VIOLation STOP
Sets violation action to STOP.
:GONogo:SCRipt
Description Activates/Deactivates the Go/NoGo APP or
queries its state.
Syntax :GONogo:SCRipt {OFF | ON | ?}
Parameter/
Return Parameter ON Turns Go/NoGo APP on.
OFF Turns the Go/NoGo APP off.
Set
Query
Set
Query
Set