GW Instek GDS-2000A series Programming Manual - Manual (Page 89)

COMMAND DETAILS
89
:MEASure:NPULSE
Description Returns the number of negative pulses.
Syntax :MEASure:NPULSE{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the number of negative pulses.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:NPULSE?
4.000E+00
Selects Channel 1, and then measures the number
of negative pulses.
:MEASure:PEDGE
Description Returns the number of positive edges.
Syntax :MEASure:PEDGE{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the number of positive edges.
Chan Off Indicates the source channel is not
activated.
Query
Query