GW Instek GDS-2000A series Programming Manual - Manual (Page 105)

COMMAND DETAILS
105
Syntax :MEASUrement:MEAS:STATE { ON | OFF | 1 | 0
| ? }
Related
commands :MEASUrement:MEAS:SOUrce
:MEASUrement:MEAS:TYPe
Parameter MEAS The automatic measurement number
from 1 to 8.
ON/1 Turn the measurement on.
OFF/0 Turn the measurement off.
Return parameter 0 Measurement is off.
1 Measurement is on.
Example :MEASUrement:MEAS1:STATE 1
Turns measurement 1 on.
:MEASUrement:MEAS:VALue
Description Returns the measurement results for the selected
measurement. This is a statistics related command.
Syntax :MEASUrement:MEAS:VALue?
Related
Commands :MEASure:SOURce
Return parameter MEAS The automatic measurement number
from 1 to 8.
Note The measurement source(s), measurement
number, measurement type and measurement
state must first be set before a measurement result
can be returned.
Query