GW Instek GDS-2000A series Programming Manual - Manual (Page 88)

GDS-2000A Programming Manual
88
Syntax :MEASure:RPReshoot{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the rising preshoot.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:RPReshoot?
2.13E-2
Selects Channel 1, and then measures the rise
preshoot.
:MEASure:PPULSE
Description Returns the number of positive pulses.
Syntax :MEASure:PPULSE{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the number of positive pulses.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PPULSE?
6.000E+00
Selects Channel 1, and then measures the number
of positive pulses.
Query