GW Instek GDS-2000A series Programming Manual - Manual (Page 219)

COMMAND DETAILS
219
Example :SEARCH:TRIGger:BUS:B1:LIN:CONDition?
>IDANDDATA
:SEARCH:TRIGger:BUS:B1:LIN:CONDition DATA
:SEARCH:TRIGger:BUS:B1:LIN:CONDition?
>DATA
:SEARCH:TRIGger:BUS:B1:LIN:DATa:
QUALifier
Description Sets or returns the LIN data qualifier.
Note: Only applicable when the search trigger
condition is set to DATA or IDANDDATA.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :SEARCH:TRIGger:BUS:B1:LIN:DATa:QUALifier
{LESSthan|MOREthan|EQual|UNEQual|LESSEQual|M
OREEQual|?}
Parameter/
Return parameter LESSthan Sets search to trigger when the data is
less than the qualifier value.
MOREthan Sets search to trigger when the data is
greater than the qualifier value.
EQual Sets search to trigger when the data is
equal to the qualifier value.
UNEQual Sets search to trigger when the data is
not equal to the qualifier value.
LESSEQual Sets search to trigger when the data is
less than or equal to the qualifier
value.
MOREEQual Sets search to trigger when the data is
more than or equal to the qualifier
value.
LESSthan Sets search to trigger when the data is
less than the qualifier value.
Set
Query