GW Instek GDS-2000A series Programming Manual - Manual (Page 159)

COMMAND DETAILS
159
:TRIGger:BUS:B1:LIN:IDentifier:VALue
Description Sets or returns the binary address string to be used
for the LIN trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :TRIGger:BUS:B1:LIN:IDentifier:VALue {|?}
Parameter/
Return parameter The size of the string depends on the
data size setting. The string must be
enclosed in double quotes, “string”.
String contents:
x = don’t care
1 = binary 1
0 = binary 0
Example :TRIGger:BUS:B1:LIN:CONDition ID
:TRIGger:BUS:B1:LIN:IDentifier:VALue "00X1X01X"
:TRIGger:BUS:B1:LIN:IDentifier:VALue?
>01100X1X01X
Set
Query