GW Instek GDS-2000A series Programming Manual - Manual (Page 183)

COMMAND DETAILS
183
:BUS1:LIN:POLARity
Description Sets or returns the LIN polarity.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:LIN:POLARity {NORMal|INVerted|?}
Parameter/Return
parameter NORMal Normal LIN polarity
INVerted Inverted LIN polarity
Example :BUS1:LIN:POLARity?
NORMAL
Returns the LIN polarity.
:BUS1:LIN:SAMPLEpoint
Description Returns the sample point of the LIN bus.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:LIN:SAMPLEpoint?
Return Parameter Returns the sample point of the LIN bus as a
percentage of the bit rate.
Example :BUS1:LIN:SAMPLEpoint?
50
Returns the sample point as a percentage.
:BUS1:LIN:SOURce
Description Sets or returns the LIN data source.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:LIN:SOURce
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13
|D14|D15| ? }
Set
Query
Query
Set
Query