GW Instek GDS-2000A series Programming Manual - Manual (Page 125)

COMMAND DETAILS
125
:TRIGger:EDGe:SLOP
Description Sets or queries the trigger slope.
Syntax :TRIGger:EDGe:SLOP {RISe | FALL | EITher | ? }
Related
commands :TRIGger:TYPe
Parameter RISe Rising slope
FALL Falling slope
EITher Either rising or falling slope
Return parameter Returns the trigger slope.
Example :TRIGger:EDGe:SLOP FALL
Sets the trigger slope to falling.
:TRIGger:DELay:SLOP
Description Sets or queries the trigger slope for the delay
trigger.
Syntax :TRIGger:DELay:SLOP {RISe | FALL | EITher | ? }
Related
commands :TRIGger:TYPe
Parameter RISe Rising slope
FALL Falling slope
EITher Either rising or falling slope
Return parameter Returns the trigger slope.
Example :TRIGger:DELay:SLOP FALL
Sets the trigger slope to falling.
:TRIGger:DELay:TYPe
Description Sets or queries the trigger delay type.
Set
Query
Set
Query
Set
Query