GW Instek GDS-2000A series Programming Manual - Manual (Page 181)

COMMAND DETAILS
181
:BUS1:CAN:SAMPLEpoint
Description Returns the sample point of the CAN bus.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:CAN:SAMPLEpoint?
Return Parameter Returns the sample point of the CAN bus as a
percentage of the bit time.
Example :BUS1:CAN:SAMPLEpoint?
50
Returns the sample point as a percentage.
:BUS1:CAN:BITRate
Description Sets or returns the bit rate of the CAN bus.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:CAN:BITRate
{RATE10K|RATE20K|RATE50K|RATE125K|RATE250K|
RATE500K|RATE800K|RATE1M | ?}
Parameter/Return
parameter RATE10K 10 kbps
RATE20K 20 kbps
RATE50K 50 kbps
RATE125K 125 kbps
RATE250K 250 kbps
RATE500K 500 kbps
RATE800K 800 kbps
RATE1M 1 Mbps
Query
Set
Query