GW Instek GDS-2000A series Programming Manual - Manual (Page 223)

COMMAND DETAILS
223
Digital Commands
The digital commands are only available when the DS2-8LA or DS2-
16LA option is installed.
:D:DISPlay ...........................................................223
:D:POSition .........................................................223
:DISPlay:DIGital:HEIght ............................................224
:DIGital:GROUP:THREshold ..............................224
:DIGital:ANAlog:A:DISPlay .................................225
:DIGital:ANAlog:A:RATio ....................................226
:D:MEMory ...........................................................226
:D:LMEMory .........................................................227
:DIGital:MEMory ........................................................228
:DIGital:LMEMory ......................................................228
:D:DISPlay
Description Turns the selected digital channel on or off or
queries its status.
Syntax :D:DISPlay { OFF | ON | ? }
Parameter/
Return parameter Digital channel number D(0 to 15).
OFF Turns the selected digital channel off.
ON Turns the selected digital channel on.
Example :D0:DISPlay ON
Turns D0 on.
:D:POSition
Description Sets or returns the position of the selected digital
channel.
Syntax :D:POSition { | ? }
Set
Query
Set
Query