GW Instek GDS-2000A series Programming Manual - Manual (Page 86)

GDS-2000A Programming Manual
86
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PERiod?
1.0E-3
Selects Channel 1, and then measures the period.
:MEASure:PWIDth
Description Returns the first positive pulse width.
Syntax :MEASure:PWIDth{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the positive pulse width.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PWIDth?
5.0E-6
Selects Channel 1, and then measures the positive
pulse width.
:MEASure:RISe
Description Returns the first pulse rise time.
Syntax :MEASure:RISe{?}
Related
Commands :MEASure:SOURce
Query
Query