GW Instek GDS-2000A series Programming Manual - Manual (Page 157)

COMMAND DETAILS
157
Example :TRIGger:BUS:B1:LIN:DATa:QUALifier?
>EQUAL
:TRIGger:BUS:B1:LIN:DATa:QUALifier THAN
:TRIGger:BUS:B1:LIN:DATa:QUALifier?
>THAN
:TRIGger:BUS:B1:LIN:DATa:SIZe
Description
Sets or returns the length of the data string in bytes
for the LIN trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :TRIGger:BUS:B1:LIN:DATa:SIZe {|?}
Parameter/
Return parameter 1~8 (bytes)
Example :TRIGger:BUS:B1:LIN:DATa:SIZe?
>1
:TRIGger:BUS:B1:LIN:DATa:SIZe 2
:TRIGger:BUS:B1:LIN:DATa:SIZe?
>2
:TRIGger:BUS:B1:LIN:DATa:VALue
Description Sets or returns the binary data string to be used for
the LIN trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Related
Commands :TRIGger:BUS:B1:LIN:DATa:SIZe
Syntax :TRIGger:BUS:B1:LIN:DATa:VALue {|?}
Set
Query
Set
Query