GW Instek GDS-2000A series Programming Manual - Manual (Page 87)

COMMAND DETAILS
87
Return parameter Returns the rise time.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:RISe?
8.5E-6
Selects Channel 1, and then measures the rise time.
:MEASure:ROVShoot
Description Returns the rising overshoot over the entire
waveform in percentage.
Syntax :MEASure:ROVShoot{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the overshoot.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:ROVShoot?
5.00E+00
Selects Channel 1, and then measures the rise
overshoot.
:MEASure:RPReshoot
Description Returns rising preshoot over the entire waveform
in percentage.
Query
Query