GW Instek GDS-2000A series Programming Manual - Manual (Page 90)

GDS-2000A Programming Manual
90
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PEDGE?
1.100E+01
Selects Channel 1, and then measures the number
of positive edges.
:MEASure:NEDGE
Description Returns the number of negative edges.
Syntax :MEASure:NEDGE{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the number of negative edges.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:NEDGE?
1.100E+01
Selects Channel 1, and then measures the number
of negative edges.
:MEASure:AMPlitude
Description Returns the amplitude difference between the
Vhigh-Vlow.
Syntax :MEASure:AMPlitude{?}
Related
Commands :MEASure:SOURce
Query
Query