Search:trigger:logic:function, Search:trigger:logic:input:clock:so urce – GW Instek GDS-2000A series Programming Manual User Manual
Page 197
COMMAND DETAILS
197
:SEARCH:TRIGger:LOGic:FUNCtion
Description
Sets or queries the Boolean logic function for logic
trigger search. Only available for firmware V1.18
or above.
Syntax
:SEARCH:TRIGger:LOGic:FUNCtion
{AND|NAND|NOR|OR}
Related
commands
:SEARCH:TRIGger:LOGic:PATtern:INPut:D
Parameter/Return
parameter
AND
AND logic trigger
NAND
NAND logic trigger
NOR
NOR logic trigger
OR
OR logic trigger
Example1
SEARCH:TRIGger:LOGic:FUNCtion NAND
Sets the search trigger logic function to NAND.
:SEARCH:TRIGger:LOGic:INPut:CLOCK:SO
URce
Description
Sets or queries which channel is used as the clock
source for the logic search trigger.
Note
When “NONe” is selected as the clock source, the
trigger will use the Pattern search trigger type.
Syntax
:SEARCH:TRIGger:LOGic:INPut:CLOCK:SOURce
{NONe | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D
9 | D10 | D11 | D12 | D13 | D14 | D15 | ? }
Related
commands
:SEARCH:TRIGger:LOGic:INPut:CLOCK:SOURce
:SEARCH:TRIGger:LOGic:INPut:CLOCK:EDGe
Parameter/Return
parameter
NONe
No clock source, Set to Pattern search
trigger.
D0 to D15
Digital channels D0 to D15
Set
Query
Set
Query