GW Instek GDS-2000A series Programming Manual - Manual (Page 237)

COMMAND DETAILS
237
:DIGital:ANAlog:A:LABel:DISPlay
Description Turns the label on/off for the selected analog
waveform or returns its status.
Syntax :DIGital:ANAlog:A:LABel:DISPlay { OFF | ON | ? }
Related
commands :DIGital:ANAlog:A:LABel
Parameter Analog waveform A(1 or 2)
OFF Turns the waveform label off for the
selected analog waveform.
ON Turns the waveform label on for the
selected analog waveform.
Return parameter Returns the status of the waveform label for the
selected analog waveform (ON, OFF).
Example :DIGital:ANAlog:A1:LABel "A1"
:DIGital:ANAlog:A1:LABel:DISPlay ON
:DIGital:ANAlog:A1:LABel:DISPlay?
ON
Sets the label for analog waveform 1 to "A1" and
then turns the label display on. The query return
shows that the label is on.
:SET:LABel
Description Sets or returns the file label for the selected setup.
Syntax :SET:LABel { | ?}
Related
commands :SET:LABel:DISPlay
Set
Query
Set
Query