GW Instek GDS-2000A series Programming Manual - Manual (Page 117)

COMMAND DETAILS
117
Related
commands :TIMebase:MODe
Parameter Horizontal position for zoom window
Return parameter Returns the zoom horizontal position.
Example :TIMebase:WINDow:POSition 2.0E-3
Sets the zoom horizontal position as 20ms.
:TIMebase:WINDow:SCALe
Description Sets or queries the zoom horizontal scale.
Note If the oscilloscope is under “ZOOM” mode, the
main timebase function will be disabled and
cannot be modified.
Syntax :TIMebase:WINDow:SCALe { | ?}
Related
commands :TIMebase:MODe
Parameter Zoom horizontal scale. The range will
depend on the time base.
Return parameter Returns the zoom horizontal scale.
Example :TIMebase:WINDow:SCALe 2.0E-3
Sets the zoom horizontal scale to 2ms.
Set
Query