GW Instek GDS-2000A series Programming Manual - Manual (Page 172)

GDS-2000A Programming Manual
172
Example :BUS1:I2C:SCLK:SOURce D0
Sets channel D0 as the SCLK source.
:BUS1:I2C:SDA:SOURce
Description Sets or queries which channel is used for the I 2 C
SDA source.
Syntax :BUS1:I2C:SDA:SOURce { D0 | D1 | D2 | D3 | D4 | D5 |
D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15
| ? }
Parameter/Return
parameter D0 to D15 Digital channels D0 to D15
Example :BUS1:I2C:SDA:SOURce D1
Sets channel D1 as the SDA source.
:BUS1:UART:BITRate
Description Sets or queries the UART bit rate.
Syntax :BUS1:UART:BITRate {| ? }
Parameter/Return
parameter UART bit rate (0~31)
Rate (bps) Rate (bps)
0 50 16 15200
1 75 17 19200
2 110 18 28800
3 134 19 31250
4 150 20 38400
5 300 21 56000
6 600 22 57600
7 1200 23 76800
8 1800 24 115200
9 2000 25 128000
Set
Query
Set
Query