GW Instek GDS-2000A series Programming Manual - Manual (Page 174)

GDS-2000A Programming Manual
174
Description Sets or queries the EOF character for the UART
packet setting.
Syntax :BUS1:UART:EOFPAcket
Parameter/Return
parameter 0: NULL
1: LF (line feed)
2: CR (carriage return)
3: SP (space character)
4: FF
Example :BUS1:UART:EOFPAcket 2
Sets the OEF character to CR.
:BUS1:UART:TX:SOURce
Description Sets or queries which channel is used for the
UART Tx source.
Syntax :BUS1:UART:TX:SOURce { OFF| D0 | D1 | D2 | D3 | D4
| D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 |
D15 | ? }
Parameter/Return
parameter OFF Off, no Tx source
D0 to D15 Digital channels D0 to D15
Example :BUS1:UART:TX:SOURce D1
Sets channel D1 as the Tx source.
:BUS1:UART:RX:SOURce
Description Sets or queries which channel is used for the
UART Rx source.
Syntax :BUS1:UART:RX:SOURce { OFF| D0 | D1 | D2 | D3 | D4
| D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 |
D15 | ? }
Parameter/Return
parameter OFF Off, no Rx source
D0 to D15 Digital channels D0 to D15
Set
Query
Set
Query