GW Instek GDS-2000A series Programming Manual - Manual (Page 260)

GDS-2000A Programming Manual
260
Related
commands :DATALOG:STATE
:DATALOG:SAVe
:DATALOG:INTerval
:DATALOG:DURation
Parameter/Return
parameter CH1 ~CH4 Channel 1, 2, 3 or 4
D0~D15 Digital channels D0 to D15
all All displayed channels.
Example :DATALOG:SOURce CH1
Sets the source to CH1.
:DATALOG:SAVe
Description Sets or queries the save format as image or
waveform.
Syntax :DATALOG:SAVe {IMAGe|WAVEform|?}
Related
commands :DATALOG:STATE
:DATALOG:SOURce
:DATALOG:INTerval
:DATALOG:DURation
Parameter/Return
parameter IMAGe Save as images.
WAVEform Save as waveforms.
Example :DATALOG:SAVe WAVEform
Sets the save format to waveform.
Set
Query