GW Instek GDS-2000A series Programming Manual - Manual (Page 233)

COMMAND DETAILS
233
Parameter Reference waveform 1, 2, 3, 4
OFF Turns the file label off for the selected
reference waveform.
ON Turns the file label on for the selected
reference waveform.
Return parameter Returns the status of the file label for the selected
reference waveform (ON, OFF).
Example :REF1:LABel "REF1"
:REF1:LABel:DISPlay ON
:REF1:LABel:DISPlay?
ON
Sets the label for reference waveform 1 to "REF1"
and then turns the label display on. The query
return shows that the label is on.
:BUS1:LABel
Description Sets or returns the file label for the bus.
Syntax :BUS1:LABel { | ?}
Related
commands :BUS1:LABel:DISPlay
Parameter The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, “string”.
Return parameter Returns the label for the bus. No
return indicates that there has not
been a file label assigned for bus.
Example1 :BUS1:LABel "Bus"
Sets the bus label as "Bus".
Set
Query