GW Instek GDS-2000A series Programming Manual - Manual (Page 82)

GDS-2000A Programming Manual
82
:MEASure:METHod
Description Sets or queries the method used to determine the
High-Low measurement values.
Syntax :MEASure:METHod { AUTo | HIStogram | MINMax
| ? }
Parameter AUTo Set to auto.
HIStogram Set to the Histogram method.
MINMax Set to the Min-Max method.
Return parameter Returns the measurement method (AUTO,
HISTOGRAM, MINMAX)
Example :MEASure:METHod: AUTo
Set the measurement method to auto.
:MEASure:FALL
Description Returns the fall time measurement result.
Syntax :MEASure:FALL{?}
Related
Commands :MEASure:SOURce
Return parameter
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FALL?
Selects Channel 1 as the source, and then measures
the fall time.
Set
Query
Query