GW Instek GDS-2000A series Programming Manual - Manual (Page 9)

INTERFACE OVERVIEW
9
Background The Ethernet interface is used for remote
configuration of the oscilloscope over a network
using the integrated web server or for remote
control using a socket server connection. For
details, please see the Web Server Configuration
section in the user manual or the Socket Server
section on page 11.
Panel Operation 1. Connect the Ethernet cable to the
LAN port on the DS2-LAN
module.
2. Press the Utility key.
Utility
3. Press I/O from the bottom menu.
4. Press Ethernet from the side menu.
5. Set DHCP/BOOTP to On or Off
from the side menu.
Note
IP addresses will automatically be assigned with
DHCP/BOOTP set to on. For Static IP Addresses,
DHCP/BOOTP should be set to off.