GW Instek GDS-2000A series Programming Manual - Manual (Page 11)

INTERFACE OVERVIEW
11
Configure Socket Server
The GDS-2000A supports socket server functionality for direct two-
way communication with a client PC or device over LAN. By default,
the Sockets Server is off.
Configure Socket
Server 1. Configure the IP address for the
GDS-2000A.
Page 7
2. Press the Utility key.
Utility
3. Press I/O from the bottom menu.
4. Press Socket Server from the side
menu.
5. Press Select Port and choose the
port number with the Variable
knob.
Range 1024~65535
6. Press Set Port to confirm the port
number.
7. The Current Port icon will update
to the new port number.
8. Press Server and turn the socket
server On.