GW Instek GDS-2000A series Programming Manual - Manual (Page 244)

GDS-2000A Programming Manual
244
:SEGMents:MEASure:PLOT:SELect
Description Sets or queries which bin to view the statics of.
Syntax :SEGMents:MEASure:PLOT:SELect { | ? |}
Related
commands :SEGMents:MEASure:PLOT:SOURce ; :SEGMents:ME
ASure:PLOT:DIVide
Parameter 1~20
(cannot exceed the number of bins)
Return parameter Return the bin number as .
Example1 :SEGMents:MEASure:PLOT:SELect 5
Set to bin number 5.
:SEGMents:MEASure:PLOT:RESults
Description Returns the results of the currently selected bin for
the statistics measurement.
Syntax :SEGMents:MEASure:PLOT:RESults?
Related
commands :SEGMents:MEASure:PLOT:SOURce ; :SEGMents:ME
ASure:PLOT:DIVide ; :SEGMents:MEASure:PLOT:SEL
ect
Return parameter Returns the statistics measurements as a string.
Example :SEGMents:MEASure:PLOT:RESults?
> MAX:240mv,MIN:200mv,MEAN:206mv,Bin
Statistics:15 of 20,Percent:0.00%,Count:0,Measured:
345,Unmeasured:0,Bin Range:228~230mv
:SEGMents:MEASure:TABle:SOURce
Description Sets or queries the source of the measurement list.
Syntax :SEGMents:MEASure:TABle:SOURce {CH1 | CH2 |
CH3| CH4 | ? |}
Set
Query
Query
Set
Query