GW Instek GDS-2000A series Programming Manual - Manual (Page 182)

GDS-2000A Programming Manual
182
Example :BUS1:CAN:BITRate?
>RATE250K
:BUS1:CAN:BITRate rate10k
:BUS1:CAN:BITRate?
>RATE10K
:BUS1:LIN:BITRate
Description Sets or returns the bit rate of the LIN bus.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:LIN:BITRate { | ?}
Parameter/Return
parameter 1200, 2400, 4800, 9600, 10417, 19200
Example :BUS1:LIN:BITRate 9600
Sets the LIN bit rate to 9600 kbps.
:BUS1:LIN:IDFORmat
Description Sets or returns the LIN ID format.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:LIN:IDFORmat {NOPARity|PARIty|?}
Parameter/Return
parameter NOPARity No parity
PARIty Parity
Example :BUS1:LIN:IDFORmat?
NOPARITY
Returns the ID format.
Set
Query
Set
Query