GW Instek GDS-2000A series Programming Manual - Manual (Page 209)

COMMAND DETAILS
209
Example 2 :SEARCH:TRIGger:BUS:B1:UART:TX:DATa:VALue?
1X1X0101
:SEARCH:TRIGger:BUS:B1:SPI:CONDition
Description Sets or queries the SPI search triggering condition.
Syntax :SEARCH:TRIGger:BUS:B1:SPI:CONDition {SS | MISO
| MOSI | MISOMOSI | ? }
Parameter SS Set to trigger on the Slave Selection
condition.
MISO Set to trigger on the Master-In
Slave-Out condition.
MOSI Set to trigger on the Master-Out
Slave-In condition.
MISOMOSI Set to trigger on the Master-In
Slave-Out and Master-Out Slave-In
conditions.
Return Parameter Returns the triggering condition.
Example :SEARCH:TRIGger:BUS:B1:SPI:CONDition MISO
Sets the SPI bus to trigger on MISO.
:SEARCH:TRIGger:BUS:B1:SPI:DATa:SIZe
Description Sets or queries the number of words for SPI data
for the search function.
Note This setting only applies when the SPI search
trigger is set to trigger on MISO, MOSI or
MISO/MOSI
Syntax :SEARCH:TRIGger:BUS:B1:SPI:DATa:SIZe { | ?}
Related
commands :SEARCH:TRIGger:BUS:B1:SPI:CONDition
Parameter Number of words (1 to 32).
Set
Query
Set
Query