GW Instek GDS-2000A series Programming Manual - Manual (Page 236)

GDS-2000A Programming Manual
236
Example :D1:LABel "D1"
:D1:LABel:DISPlay ON
:D1:LABel:DISPlay?
ON
Sets the D1 label to "D1" and then turns the label
display on. The query return shows that the label
is on.
:DIGital:ANAlog:A:LABel
Description Sets or returns the waveform label for the selected
analog waveform (from Logic Analyzer function).
Syntax :DIGital:ANAlog:A:LABel { | ?}
Related
commands :DIGital:ANAlog:A:LABel:DISPlay
Parameter Analog waveform A(1 or 2)
The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, “string”.
Return parameter Returns the label for the selected
analog waveform. No return indicates
that there has not been a file label
assigned for the selected analog
waveform.
Example1 :DIGital:ANAlog:A1:LABel "A1_lab"
Sets the label for analog waveform 1 as "A1_lab".
Example2 :DIGital:ANAlog:A1:LABel?
A1_lab
Set
Query