GW Instek GDS-2000A series Programming Manual - Manual (Page 254)

GDS-2000A Programming Manual
254
Parameter/ OFF Disabled
Return Parameter ON Enabled
Example :GONogo:EXECute OFF
Turns Go/NoGo off.
:GONogo:FUNCtion
Description Initializes the Go/NoGo APP. This must be run
after the Go/NoGo APP has been started.
Syntax :GONogo:FUNCtion
:GONogo:NGCount
Description Returns the Go/NoGo counter.
Syntax :GONogo:NGCount {?}
Return parameter Returns a string in the following format “number of
violations,total tests”
Example :GONogo:NGCount?
> 3,25
Indicates that 3 violations occurred over 25 tests.
:GONogo:NGDefine
Description Sets the Go/NoGo “When” conditions.
Syntax :GONogo:NGDefine {EXITs|ENTers|?}
Parameter/
Return Parameter EXITs Sets the NoGo condition to when the
input signal exceeds the limit boundary.
ENTers Sets the NoGo condition to when the
input signal stays within the limit
boundary.
Example :GONogo:NGDefine EXITs
Sets the Go/NoGo condition to EXITs.
Set
Query
Set
Query