GW Instek GDS-2000A series Programming Manual - Manual (Page 135)

COMMAND DETAILS
135
SPI SPI mode
UART UART mode
PARALLEL Parallel mode
Example :TRIGger:BUS:TYPe?
UART
:TRIGger:BUS:B1:I2C:CONDition
Description Sets or queries the I 2 C trigger conditions.
Syntax :TRIGger:BUS:B1:I2C:CONDition
{STARt | STOP | REPEATstart | ACKMISS | ADDRess |
DATA | ADDRANDDATA | ? }
Parameter STARt Set Start as the I 2 C trigger
condition.
STOP Set Stop as the I 2 C trigger
condition.
REPEATstart Set Repeat of Start as the I 2 C
trigger condition.
ACKMISS Set Missing Acknowledgement
as the I
2 C trigger condition.
ADDRess Set Address as the I 2 C trigger
condition.
DATA Set Data as the I 2 C trigger
condition.
ADDRANDDATA Set Address and Data as the I 2 C
trigger condition.
Return parameter Returns the I 2 C bus trigger condition.
Example :TRIGger:BUS:B1:I2C:CONDition ADDRess
Set Address as the I2C trigger condition.
Set
Query