GW Instek GDS-2000A series Programming Manual - Manual (Page 245)

COMMAND DETAILS
245
Related
commands :SEGMents:MEASure:MODe ; :SEGMents:MEASure:T
ABle:SELect ; :SEGMents:MEASure:TABle:LIST
Parameter/
Return parameter CH1~CH4 Channel 1 to 4
Example1 :SEGMents:MEASure:TABle:SOURce CH1
Sets the source to CH1.
:SEGMents:MEASure:TABle:SELect
Description Sets or queries a segment to view in the
measurement table.
Syntax :SEGMents:MEASure:TABle:SELect { | ? |}
Related
commands :SEGMents:TOTalnum
Parameter 1~2048
Return parameter Returns the number of segments as .
Example1 :SEGMents:MEASure:TABle:SELect 10
Select segment number 10.
:SEGMents:MEASure:TABle:LIST
Description Returns the measurement results of each segment
in the list.
Syntax :SEGMents:MEASure:TABle:LIST?
Return parameter Returns the measurements results as a string for
each segment.
Example :SEGMents:MEASure:TABle:LIST?
>"GW GDS-2064A, serial number P930116, version
V1.11",Segment Summary : CH1, Seg.,Pk-Pk
(V),Pk-Pk (V),1,8.00m,8.00m……etc
Set
Query
Query