GW Instek GDS-2000A series Programming Manual - Manual (Page 84)

GDS-2000A Programming Manual
84
Example :MEASure:SOURce1 CH1
:MEASure:FPReshoot?
Selects Channel 1, and then measures the fall
preshoot.
:MEASure:FREQuency
Description Returns the frequency value.
Syntax :MEASure:FREQuency{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the frequency in Hz.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FREQuency?
1.0E+3
Selects Channel 1, and then measures the
frequency.
:MEASure:NWIDth
Description Returns the first negative pulse width timing.
Syntax :MEASure:NWIDth{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the negative pulse width in
seconds.
Chan Off Indicates the source channel is not
activated.
Query
Query