GW Instek GDS-2000A series Programming Manual - Manual (Page 218)

GDS-2000A Programming Manual
218
String contents:
x = don’t care
1 = binary 1
0 = binary 0
Example :SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe 1
:SEARCH:TRIGger:BUS:B1:CAN:DATa:VALue
"01010X1X"
:SEARCH:TRIGger:BUS:B1:CAN:DATa:VALue?
>01010X1X
:SEARCH:TRIGger:BUS:B1:LIN:CONDition
Description Sets or returns the LIN search trigger condition.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :SEARCH:TRIGger:BUS:B1:LIN:CONDition
{{SYNCField|IDentifier|DATA|IDANDDATA|WAKEup|S
LEEP|ERRor|?}
Parameter/
Return parameter SYNCField Sets the LIN search trigger condition
to the sync field.
IDentifier Sets the LIN search trigger condition
to identifier field.
DATA Sets the LIN search trigger condition
to the data field.
IDANDDATA Sets the LIN search trigger condition
to identifier and data field
WAKEup Sets the LIN search trigger condition
to wake up.
SLEEP Sets the LIN search trigger condition
to sleep.
ERRor Sets the LIN search trigger condition
to error.
Set
Query