GW Instek GDS-2000A series Programming Manual - Manual (Page 246)

GDS-2000A Programming Manual
246
:SEGMents:MEASure:TABle:SAVe
Description Saves the list of segment automatic measurement
results.
Syntax :SEGMents:MEASure:TABle:SAVe
:SEGMents:SAVe
Description Saves the segments.
Syntax :SEGMents:SAVe
Related
Commands :SEGMents:SAVe:SOURce ; :SEGMents:SAVe:SELect:S
TARt ; :SEGMents:SAVe:SELect:END
Example :SEGMents:SAVe:SOURce CH1
:SEGMents:SAVe:SELect:STARt 1
:SEGMents:SAVe:SELect:END 10
:SEGMents:SAVe
:SEGMents:SAVe:SOURce
Description Sets or queries the source segment waveform to
save.
Syntax :SEGMents:SAVe:SOURce {CH1 | CH2 | CH3|
CH4 | ? |}
Parameter/
Return parameter CH1~CH4 Channel 1 to 4.
Example :SEGMents:SAVe:SOURce CH1
>Sets the source to CH1.
Set
Set
Set
Query