GW Instek GDS-2000A series Programming Manual - Manual (Page 94)

GDS-2000A Programming Manual
94
Example :MEASure:SOURce1 CH1
:MEASure:MAX?
1.90E-3
Selects Channel 1, and then measures the
maximum amplitude.
:MEASure:MIN
Description Returns the minimum amplitude.
Syntax :MEASure:MIN{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the minimum amplitude.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:MIN?
-8.00E-3
Selects Channel 1, and then measures the
minimum amplitude.
:MEASure:PK2PK
Description Returns the peak-to-peak amplitude (difference
between maximum and minimum amplitude).
Syntax :MEASure:PK2Pk{?}
Related
Commands :MEASure:SOURce
Return parameter Returns the voltage or current peak to
peak measurement.
Query
Query